Sorry, your browser does not support JavaScript!

Monitoring QuickStart(WEM3080T)

1. Introduction

By installing only one WEM3080T (three phase WiFi energy meter) in your single phase solar PV system, and clamping the first CT onto grid, the second CT onto solar inverter and the third CT onto load if applicable, you can monitor "From Grid" (the energy consumed from the grid), "To Grid" (the energy exported to the grid) and the energy produced by solar inverter. You can monitor the energy flow of the solar PV system.

2. Wiring Diagram

Install the meter on grid side and ensure that the CT direction is correct.

Wiring 1

3. Hardware Installation

Hardware Installation

Please refer to Tutorial Video for hardware installation guidance.

4. Wi-Fi Setup by Mobile App

Step1, scan the QR code and download the mobile app

Step1

Step 2, search and connect the iMeter's access point signal iMeter_xxxxxxxx by your phone

Step 2

Step 3, Open app and find the iMeter

Step 3

Tips: If the app prompts "Invalid device version", you need to setup the WiFi network by browser. Same as 3.3 WEM3162T QuickStart

Step 4, Select the SSID of your home WiFi network;

Step 4

Step 5, Enter password and save. After succesfully configure the WiFi settings, you will see that the IP address allocated for the iMeter.

Step 5

4. Sign up by Mobile App

Sign up

Tips: SN is the unique Serial Number of your iMeter. You can copy it from the iMeter's access point signal (iMeter_xxxxxxxx, xxxxxxxx is the SN).

5. Set the Time Zone

Time Zone

Tips: Time zone must be set according to your location for correct data display and report on time basis.

6. Edit the Meter Type

Edit the Meter

Tips: It is "Single phase" as default meter type in Iammeter system. You need to change the meter "Type" as "Three phase"

7. Set the Use Type of Each CT

Tips: Please set the use type of each CT according to the actual CT installation. For example, if you clamp the CT of phase A onto grid, then you set its use type as "grid".

8. View the Data

View on Mobile App View the data

View on Web Cloud

Solar PV System Overview

Tips: Please visit https://www.iammeter.com to login to the web portal. Same username and password as app. You can see more analysis report on web.

Note

If you have a WeChat account, please follow our IAMMETER WeChat public ID.

iammeter.jpg

Top