By installing only one WEM3080 (single phase WiFi energy meter) in your single phase solar PV system, you can monitor "From Grid" (the energy consumed from the grid) and "To Grid" (the energy imported to the grid) simultaneously.
Install the meter on grid side and ensure that the CT direction is correct.
|1||Wi-Fi Energy Meter||1||Wi-Fi Module Embedded|
|2||Split-core Current Transformer||1||150A and 250A CT optional|
Please refer to Tutorial Video for hardware installation guidance.
Step1, scan the QR code and download the mobile app
Step 2, search and connect the iMeter's access point signal iMeter_xxxxxxxx by your phone
Step 3, Open app and find the iMeter
Tips: If the app prompts "Invalid device version", you need to setup the WiFi network by browser, referring to 3.1 WEM3162 QuickStart
Step 4, Select the SSID of your home WiFi network;
Step 5, Enter password and save. After succesfully configure the WiFi settings, you will see that the IP address allocated for the iMeter.
Tips: SN is the unique Serial Number of your iMeter. You can copy it from the iMeter's access point signal (iMeter_xxxxxxxx, xxxxxxxx is the SN).
Tips: Time zone must be set according to your location for correct data display and report on time basis.
Tips: Please set the use type of each CT according to the actual CT installation. For example, if you clamp the CT of phase A onto grid, then you set its use type as "grid".
View on Mobile App
View on Web Cloud
Tips: Please visit https://www.iammeter.com to login to the web portal. Same username and password as app. You can see more analysis report on web.
If you have a WeChat account, please follow our IAMMETER WeChat public ID.