|1||Wi-Fi Energy Meter||1||Wi-Fi Module Embedded|
|2||Split-core CT (Current Transformer)||1||60A and 230A CT optional|
Wiring in a Single Phase Solar System
Wiring in a Single Phase Residential Electricity System
Step1, scan the QR code and download the mobile app
Step 2, search and connect the iMeter's access point signal iMeter_xxxxxxxx by your phone
Step 3, Open app and find the iMeter
Tips: If the app prompts "Invalid device version", you need to setup the WiFi network by browser, same as 3.1 WEM3162 QuickStart
Step 4, Select the SSID of your home WiFi network;
Step 5, Enter password and save. After succesfully configure the WiFi settings, you will see that the IP address allocated for the iMeter.
Tips: SN is the unique Serial Number of your iMeter. You can copy it from the iMeter's access point signal (iMeter_xxxxxxxx, xxxxxxxx is the SN).
Tips: Time zone must be set according to your location for correct data display and report on time basis.
Tips: Please visit https://www.iammeter.com to login to the web portal. Same username and password as app.