-
23
2023-03
Control other devices with regard to the value of power readingUse the power reading of the energy meter as the sensor, control the actuators for better performance -
08
2023-03
Recommend purchasing channel for the IAMMETER`s productsPurchase the IAMMETER`s Wi-Fi energy meter in the most cost-effective way -
27
2023-02
Real-Time Energy Monitoring and Power Alerts with 1-Second DataMonitor voltage, current and active power every second with IAMMETER-Docker. Configure per-phase thresholds, review alarms and export alarm logs. -
15
2023-02
The FAQ about the possible abnormal situation in usewhat the power meter will do when it loses connection with the router, meet a power supply outage or networking faulty. -
17
2023-01
Notice of holiday & New features that upgraded since 2022This is a short introduction to the features that upgraded since 2022(IAMMETER,home assistant,zabbix). -
17
2023-01
Integration the power Meter into ZABBIXUse the Wi-Fi energy meter in Zabbix step by step -
29
2022-12
How do find the power meter with regard to your requirementscloud service of energy consumption monitoring ,open source home automation, smart energy meter,on-premises energy management solution -
23
2022-12
Updates recently:special load analysis,Home assistant,IAMMETER-simulaotorAnalyze the special load , line voltage Vs phase voltage, four ways to integrate the energy meter into the Home assistant, set TOU or tiered billing template in HA -
25
2022-11
Use IAMMETER-simulator to optimize your solar PV systemThis simulator is an open-source project, you can create your own load profile and solar PV output and try to optimize them. -
28
2022-09
IAMMETER Wi-Fi Energy Meter: Local APIs and Open InterfacesUse IAMMETER through local HTTP APIs, MQTT/MQTTS, Modbus TCP, TCP/TLS or HTTP/HTTPS with custom ports. Legacy firmware pages are retained at the end. -
09
2022-09
IAMMETER@HACS(home assistant custom component)Submit IAMMETER`s custom component in home assistant (HACS) -
17
2022-08
MQTT Energy Meter for Home Assistant: Manual YAML SetupConnect an MQTT energy meter to Home Assistant manually. Configure the broker, topic, JSON templates, YAML sensors and imported/exported kWh for the Energy Dashboard.
